notifications - "Low on space" warning with over 50% free ...

Interested in contributing to the BTC network? Here is the steps to get a full node up and running in Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to Bitcoin [link] [comments]

[original research / proposal] [codenamed: BUTTBREAKER] A Million Little Shitchains

This concept is guaranteed to annoy you or your money back!
This builds on the 100,000 tps proposal. To recap, I've thrown together 100 clonecoins with 50MB cap each "into one large Voltron Coin", as SoCo_cpp aptly put it.
Now I'm going to wave my hand, wait for the ding, and level up to exascale technology. So terabytes are basically kilobytes now.
Our previous "Voltron Coin" will be termed "MegaBlockA" (MBA) and will have become the new Bitcoin: it's top by marketshare and stagnating. It has 100,000 tps throughput, which should be enough for anyone, and a fee market is now developing. Dice transactions have started to be labeled as spam, and bible verses now cost $1 or more to embed in the megachain (composed of all 100 subsidiary clonecoin chains).
A Commodore of Industry develops a bold, new scheme: a million little shitchains. A million generic chains are created, and organized into 1,000 blockchain units each on the model of MBA, termed MegaShitChain1 through MegaShitChain1000. A controlling overchain, known as the UltraShitChain (USC), is similarly composed of those MegaShitChains. One USC represents a coin on each of the one million shitcoins, through being one coin in each of the MegaShitChains.
The total throughput available for USC transactions on the shitcoins would be one billion transactions per second, based on the 50 MB block size hard cap and 1 minute block rate of the clones. The total disk space and bandwidth necessary in order to keep a full USC node synchronized will be greater than that needed for a modern NSA data center, but we're in exascale, so it'll be like a $5 calculator.
Prohashing is the new Google, as Scrypt mining becomes the most profitable industry in the world. AmericanPegasus is on CNN every night warning about how cryptocurrency has now developed into a bubble and investors should consider putting their money into conventional equities instead as a hedge. Subsistence farmers in Africa invest a dollar into USC and cash out for millions (of shitcoins worth less than a dollar collectively which are then sold to neighbors). Euphoria and weaseldust run rampant on the streets and hospitals are overwhelmed with overdoses.
And that's the story of how scale-out solved throughput.
Usecases
Decentralized mining
The NSA can sponsor a ProHashing underwater Scrypt mining megacenter in each of the seven oceans (more depending on how one counts). The accelerated ocean warming should be ideal for swimming (may not be ideal for swimming; no warranty of fitness of warmed oceans for swimming should be implied).
Tradebots / SkyNet 2.0
Autonomous, intelligent tradebots become massively wealthy trading between the million underlying shitcoins. These bots become leading patrons of the Robot Supremacy movement which is a major advance in sentient being rights overall, although human rights suffer a bit incidentally during the uprising and for a few centuries thereafter.
Weaseldust Road
The ultimate in weaseldust markets, Weaseldust Road is hosted on the USC ultrashitchain itself and is its killer app. The Weaseldust Road client, codenamed HONEYPOT, is a full USC node combined with a few trojans and a GUI for accessing Weaseldust Road. Featuring suspiciously low prices on weaseldust as well as some sellers with long-term (1+ month) exit scams who provide excellent service in the meantime, Weaseldust Road quickly becomes the leading weaseldust marketplace, as well as being the second place market for buying alpaca socks with USC (behind Alpaca Road, which is the second leading weaseldust marketplace).
In fact, Weaseldust Road's legendary abilities as a killer app will ultimately be memorialized in the song Weaseldust Road, with the "you never come back from Weaseldust Road" refrain, a tribute to the Copperhead Road song linked above, as well as to the wave of weaseldust-related deaths linked by critics to the rise of Weaseldust Road.
Proofs
1=1, therefore, quod erat demonstrandum.
I can conceive of it, and I can imagine that it necessarily exists, therefore, it exists.
If a thousand angels can dance on the head of a pin, and if the Lightning Network can handle infinite throughput, and if the weaseldust supply lasts, and if the USC ICO raises at least 22 million BTC in value, then USC will be created and trade above its par value of 1 satoshi per million USC.
lorem ipsum, nil illegitimi carborundum, hocus pocus
submitted by coinaday to Buttcoin [link] [comments]

Nyancoins Megapost - Central Link Collection

Edit: Going to finally start an overhaul on this (April 23rd, 2016); it's been six months since the last edit. I'm going to go from current back, so there's going to be a gap between this top, new stuff and what's below until I finish the update.
I'm just going to have the last six months all shoved together into one large update here. There's weak categorization, but basically just think of it as a huge list. In general, the newer items will be higher within a given category than the older items. I apologize if I left anything out which people would like to see included. Some things I considered more of a temporary update than something relevant months later, but just PM me and I'll add anything requested!
We're currently in a quiet low point. Nothing catastrophic is happening, but we are relatively weak. I call it "the best nadir" because if this is as bad as it gets, we're doing alright. The price is down to 4 satoshi now, which is the lowest sustained price since the beginning of the revival. I'm going on a year behind my original goal for releasing NYAN2, still stuck on a new build computer (alternately time and energy to cripple together a build system out of what I have available).
One major new element: I've set a goal for us to have a mission to visit the site of Apollo 17 in twenty years. This is basically a new dimension. For the first ten years, I envision this as a purely "paper program", doing research on past space programs, in particular Mercury through Apollo, but any and all launch platforms and spacecraft which have been done. We may additionally seek to gain additional education (for instance, I would like aerospace engineering and material science undergraduate degrees at a minimum; we also are going to need experienced test pilots).
Space Program Initial Vision: [NYAN 2035] We must send a mission to visit the site of the Apollo 17 plaque on the Moon
Also, I've replaced the previous "Nekonauts of the Month" competition with a "Who Wants to be a Nillionaire?". The major difference is that rather than relying upon me to track everything, the expectation is that Nekonauts will sign up and self-report accomplishments.
Nyan Projects
[Hype] Browser based MMORPG accepting Nyancoins for member items: KojoSlayer's latest foray into nyan video game development! I've seen an early preview and it reminds me of a primitive Runescape (meant as a compliment)
Fun Posts
Insert NyanDisk 1 into Drive A:: NyanDOS!
Nyan like it's 1999 ....: telnet into nyan!
[breaking news] Nyancoins will be bought out by Garza in a last-ditch attempt to save Paycoin - April fool's post
Trumpchain on Twitter: "It can happen. Our blockchain has tremendous potential. We have tremendous people. #MakeTheBlockchainGreatAgain" - Terrific shitpost; really fantastic!
Join the Nekonauts today! - Cool nyan poster
"I really hope Satoshi is finally dumping and declaring that, like, Nyancoin is the true bearer of his vision." - CountOneInterrupt - My favorite idea ever
Nyancoin Zen - So cute. This may be my favorite nyan image ever for its understatement and beauty.
High Definition Nyan up close - Amusing
Making PC more Nyan-Friendly! - cute; amusing. Such nyan!
Typical Nyancoiner breakfast. - DobbsCoin is great with this stuff!
[meta] [misadventures of coinaday] [Pizza Boy Adventures] Late Night Pizza - Just a little choose-your-own-delivery I wrote during my stint as a pizza delivery boy.
I don't know how I wasn't aware of this site before - I still can't believe there's an entire site for this!
Get NYAN
Want more NYAN? Faucet Mrai and trade to me for NYAN (and then hodl!): What is says on the tin. The faucet is down temporarily at time of this writing, but it'll be back up before I update this section likely. The price offered there is low (mailing list mentioning 200-300 satoshi currently; my offer is worth about 2 satoshi currently); I would consider higher, but probably wouldn't pay those apparent market rates (no actual exchange yet).
Force Multipliers
Content about the difference a determined person can make. Intended as inspiration.
[Force Multiplier] [Original Content] [pdf; 23 pages] Archimedes and the Siege of Syracuse - Previously unpublished paper I wrote for a history course in college.
[Force Multipliers] [Military History] Julius Caesar's Greatest Military Victory (Video; 10 minutes) - An explanation of achieving victory in an apparently unwinnable situation.
[Force Multipliers] [Naval History] Korea: Admiral Yi - I: Keep Beating the Drum - Extra History - Incredible loyalty and dedication from this greatest Admiral saved his country
Philosophy
Content which fits the themes of fun, self-improvement, and service to others.
Wikipedia essay: WikiLove - I think Wikipedia's policies are in a lot of ways something to look up to. It's true that they're stuck in bureaucracy now, and have driven away many experts, but they function and their policies have helped to give some structure to the anarchy.
[US history and macroeconomics] [59 minute video] Thom Hartmann, "The Crash of 2016" - Interesting video. I think the predicted outcome is something of a longshot, but it's interesting to me that he called Sanders as a major factor in the election years ago.
Taylor Mali, "Words and Their Consequences" (68 min video) - Poetry and philosophy
We Are One - Didn't get any attention at the time, but this is a general statement about the power of people working together.
A Message of Hope for the World - What's the point of Nyancoins? To inspire people.
A brief word on censorship - tl;dr: Censorship is bad, m'kay?
Who Owns Nyancoins? - Hodlers.
To The Moon is Not Enough: 100 Year Planning - About the importance of an unlimited time horizon. We build to last.
General
Catch-all category. Okay, this category got out of hand. I should do a second round later and break this out into a few different ones.
The best argument I've heard so far for keeping the 1MB cap in Bitcoin - I still think it would have been better for Bitcoin to grow, but this is the strongest argument for its stagnation in capacity that I've seen.
[conceptual design] How we should expect 100,000 transactions in a minute (or second?) to be handled - This is about the idea that we should expect to be able to handle large loads without crashing. Pretty basic. Related to an /cryptocurrency post I'd made: 100,000 Transactions Per Second: How Do We Get There?, which gives a very high-level overview of one way to reach high throughput capacity using blockchains.
Interesting cryptocurrency to try: raiblocks, protocol without transaction fees or block rewards - I think Raiblocks will be a valuable "companion coin" to Nyancoins ultimately. I don't know how exactly that'll work, but I believe that good cryptocurrency communities should make alliances. If nothing else, we can be valuable to each other as the "loyal opposition", critics who want to see success.
Coin-a-Year: Nyancoin : link to /CryptoCurrency post - Summary of the first year or so of NYAN revival
[far future concept] Nyanshares, Nythereumbits, and all-in on 37 rainbow - A double post: first part describes a possible spin-off, hybrid, 'companion coin' we could make in future years. The second part talks about what a gamble NYAN is.
NyanCoin compilation guide and downsizing nyan.space / NyanChain [semi-meta] - Has a link to a guide for compiling nyancoind on servers.
[meta] [misadventures of coinaday] Stuck in the Dihydrogen Monoxide - Another in a series of coinaday posts proving "play stupid games; win stupid prizes"
[Data] Faucet Stats - KojoSlayer's faucet stats
Thing to do a thing that can't do that thing.... - Bit of code for pulling BTC/NYAN feed from Cryptopia.
Fresh builds, coming up! - initial report from vmp32k on attempting to modernize the codebase
DigiShield - suggestion for different difficulty algorithm
BIP101 implementation to be made available for altcoins - prohashing announcing that they will have a Scrypt BIP101 implementation; this is planned to be our base for NYAN3
Year 1: Acquisition and Triage ; Year 2: Acquisition and Build - Optimistic; in reality, year two of the revival has largely been me just trying to survive. Hopefully more acquisition and build as the year goes on.
[technical] [financial] Price Stability and Consistent Hashing - Basic theory. If we have consistent prices, we'll have more consistent hashing.
[technical] [forking] [NYAN3] Should running old defaults be considered a vote against a hard fork or should the veto need to be explicit? / General voting discussion - What it says on the tin. I haven't gotten feedback on this yet. It's far in the future, but I think it's a critical question. I'm not sure which way is correct.
2015 in review: overview - Initial summary of the previous year; written before the Coin-a-Year post which did similar
[meta] [finance] [misadventures of coinaday] Paying Debts - Since writing this, I've gone further into debt. I need to get my personal finances together this year, for my own sake, for the sake of those I owe, and for the sake of Nyancoins.
Countdown to the Second Halving - The current block is 1168851 as I write this; we've got less than 350,000 more blocks until the third halving!
I updated the major risks page for Nyancoins to include mention of the fork bug and 'time warp'. Please review and comment. - bolded for visibility; I consider the risks document and making sure that we inform potential buyers as much as possible to be a critical requirement for us
[technical] [security] Time warp, fork bug, disclosure policies, and practical results: a working system despite flaws - Discussion of the success of Nyancoins as a working system despite its technical vulnerabilities.
Zero Fees (*) - Discussion of the role of zero fee transactions and why I consider them important
[finance] [meta] [Misadventures of coinaday] overdrafts and consequences / Cryptopia 1sat Dump - Discussion of my stupidity and its consequences on Nyancoins' financial health
[technical] NIP 1: Base NYAN3 on XT - I consider this critical. We will make a statement about not following the path Bitcoin is currently going down. This is not urgent for us because our activity is so low, but it will be part of building a strong foundation for the future.
Hodling Update: 30% - I haven't done the math recently. I'm probably within 5% of this, but I don't know if I've gone up or down. I haven't given away a whole lot, but I have put no new money into Nyancoins for months from being so broke. I've still gained some millions more from when my 5 satoshi bids got hit though.
[finance] Up? Down? Horizontal? - Considering 30 - It's pretty sad how far we are from 30 satoshi now (4 satoshi at the moment). I believe we'll get it back ultimately, but the revival certainly hasn't had the financial success I'd hoped.
Dice soft launch - Not sure of the current state here. Check with KojoSlayer.
State of the NYAN October 2015: An interlude for gratitude and yearning for more - I should get back to doing these monthly eventually. Right now it's quiet enough that there doesn't seem to be a real need.
[financial] NYAN vs DOGE as a long-term store of value - What it says. I believe that the lower supply inflation and smaller supply of NYAN will ultimately lead to NYAN trading above DOGE (currently trading at less than 10:1).
[finance] [stats] [gaming] Breaking the Bank: Risk-of-Ruin, Dice Games, and Basic Logic - I'm pretty proud of this one. By having more money than god, and a screwed up default max bet rule, I was able to beat the house. 8-)
100M - Talking about the remaining supply and the implications.
I think I'm done with this update (at least getting the new content in; I have not changed the old text and content, which is everything below).
Since I can only have one thing stickied at a time, but there are a lot of different things going on, I've switched over to having one main link collection post. And this is it.
I'll update this periodically (I'll try to do a major update once a month) and might replace it at some point. It'll have general discussion of the context behind why these various threads are significant.
I'm doing August and September together for Nekonaut awards and updates here since I got a bit busy at work. NYAN2 is released as a first-draft, but I haven't built it yet (nor done final changes and fixes). I need a computer with more RAM than what I have available to me now. However, I'm quite satisfied with the performance of NYAN1.2, ancient though it may be, so I'm not treating it as an emergency.
The biggest news is that we are now listed on cryptopia.co.nz ! They are a great community and provide better ecosystem support than most exchanges: they include a pool and explorer along with the exchange. And their exchange has a lot of basepairs, with NYAN/BTC, NYAN/UNO, NYAN/DOGE, and NYAN/DOT being relatively active, NYAN/LTC being quiet, and the other two (popularcoin and feathercoin) being unfamiliar to me and generally unused.
Oh, also, when I've taken a look at it, the Nyanchain seems to be running smoothly. I haven't been watching too closely, but the status page is usually showing all green. I especially like seeing the high number of connections (generally close to 30). [Comment from July version; still accurate. I should get automated metrics on the Nyanchain someday, but in the meantime, it seems to be moving pretty smoothly anecdotally.]
Top stories from August and Septemberish
Nekonauts of the Months, August and September 2015 - Combined awards, three awards for 1M as a result, and such. Just check it out. :-)
New IRC channel and tipbot - This came about during the listing process; we are now at #nyan2
WE ARE LIVE! Cryptopia added us just now!! - Culmination of the process of getting listed on Cryptopia. After leading in user votes and DOT votes after the first couple days, the admins decided to add us. So as I count it, we won three votes. :-)
Looking good on Cryptopia so far - My early reaction to the exchange.
The past few days. - Repost of a classic, which is always a good idea in NYAN, given our rich archives.
Miners We Need YOU! - Brief discussion by KojoSlayer about the importance of miners to the Nyancoin ecosystem.
Nyancoind Dockerfile (for the tech-nyans) - Cool demo by vmp32k
Nyancat all up on your Vim command line. - Cool xpost from /vim.
[financial] I hit a positive balance on Cryptsy-NYAN again - I started buying on Cryptsy. I've since withdrawn from Cryptsy and am working on eliminating my balances there, but I've got a lot of altcoins to consolidate yet.
100M - A discussion of the remaining supply to be generated (now under 100 million more coins)
Top stories from July
Gitian Build Instructions - !!! This is exactly what I was trying to figure out. With this roadmap, we should be able to help others build *coins with gitian as well as provide a solid introduction to our own community members. This should be linked and submitted for feedback elsewhere; I should report back to the Litecoin thread with a link to this for discussion. I cannot overstate how important I find this contribution.
Nekonauts of the Month, July 2015 - Still going with this. I may not always get this perfect, but I hope that it will help add some motivation and recognition to the community who is building the next generation of Nyancoins.
Ɲyancoins for Nekonauts! [designs] - Some logos and concept art; a start by W7phone; we hope to see more of this type of thing!
[hypothetical] What would it take for us to be able to start our own Nyan exchanges? - tl;dr: Let's get setup on some decentralized exchanges!
Linux Nekonauts: Building nyancoind - I should get this in the sidebar somewhere. An excellent first post by gentlenyan !
Top stories from June
Nekonauts of the Month, June 2015 - Latest round of awards; I plan to keep doing this each month for as long as I can
[community] You are a leader of Nyancoins / Herding Cats: Leading Leaders; Leadership in a Decentralized Community - A discussion of the importance of you to the success of Nyancoins
vmp32k launches a beta of a faucet - When is this going live?
kojoslayer launches a faucet
Various post on mining being stuck - we are still a bit spotty, but it seems like it might be a bit better. We could use something more than just an instantaneous status page; if someone wants to make something which does statistical analysis of the performance of the nyanchain, that would be awesome.
Broke through the 40 satoshi ceiling, and Plagiarizing great speeches in history and claiming to have a community mandate: Coin-a-Day writes inspirational pap as we stand on the verge of breaking through the 50 satoshi ceiling and envisions the glorious future ahead - and rather more. The price dipped back down on Cryptsy since, but we had a nice rise for a while. I'm hoping that when we get an exchange we have confidence in, we'll see more buying again.
Warning: Cryptsy does not process large NYAN withdrawals - This is why I recommend not using Cryptsy; plus this
Top stories from May
First off: Ɲyancoins needs YOU! - This is a discussion of how all of us have something we can do for Nyancoins, and how improving your own life is absolutely one of those things.
Nekonauts of the Month, May 2015 - This is my first month running this competition. I'm looking to recognize people who are active and contributing to the community and to give them NYAN to help further whatever they'd like to do next.
The network is stable! - Thanks to a new miner, spydud22, we are showing all green on status!
Wow, very large chunk of NYAN at 40 satoshi (6 million) - The title is outdated; there's about double this volume now. [Edit: And now the title is accurate again.]
Initial notes and thoughts on the Nyancoins client update - I've identified the approximate version of Litecoin that Nyancoins is based on and looked at a diff. It looks reasonable and do-able. I haven't yet looked at the latest branch on which I'll apply these changes.
Nyancoins 2.0
https://github.com/mathwizard1232/nyancoins/tree/nyancoins2 - first draft of NYAN2
(intentional duplication from top stories for July; I consider it that important): Gitian Build Instructions - !!! This is exactly what I was trying to figure out. With this roadmap, we should be able to help others build *coins with gitian as well as provide a solid introduction to our own community members. This should be linked and submitted for feedback elsewhere; I should report back to the Litecoin thread with a link to this for discussion. I cannot overstate how important I find this contribution.- earlier working notes
Cross-platform Gitian builds - Discussion about getting Gitian builds to work for Mac without access to a Mac.
Initial notes and thoughts on the Nyancoins client update - Right now I haven't had time to do much more on this, but I need to work on doing the Litecoin gitian build yet.
Gitian Build - jwflame's initial notes on trying the gitian build
DLC
Distributed Library Coin; stealing^Wrepurposing the ideas of others - Introducing the concept; basically a virtual lending library for the community; Learned Optimism is offered.
[DLC] Siege of Earth - Second post, offering Siege of Earth, a classic sci fi tale
Minecraft
[Idea] Minecraft NyanCoins - KojoSlayer is making a cool Minecraft Nyancoins faucet sort of thing (get Nyancoins for playing Minecraft).
[Sneak Peak] Nyancoin Minecraft Server - This project is moving forward quite quickly! See also /NyanCoinsMC for more information.
[Beta] Launch Nyancoins Minecraft Server : NyanCoinsMC - BOOM! I'm amazed at how quickly this has gotten setup. Go check it out!
Background / theory
Overview of major risks of buying Nyancoins - I've tried to collect every risk I could think of in this one place. This is important reading before investing.
Nyan's core principles and why they matter
draft one of Cold Storage 101: How to secure your coins for long-term hodling - I need to incorporate the suggestions still, but between the article and the comments, this is decent.
I will work harder: in which Coinaday reports for duty - My statement that this is going to a new level for me: I'm considering this my dream job now, rather than just my hobby. I'm dedicating myself to serving this community as best I can.
[community] You are a leader of Nyancoins / Herding Cats: Leading Leaders; Leadership in a Decentralized Community - This is a discussion of the importance of each individual, in particular you, to this revival.
A really good read about fiduciary duties in running an exchange - discussion of the responsibility one takes on in managing money for others
[rant] In response to "there is only BTC [and maybe LTC [and maybe DOGE]] AND DEFINITELY NOTHING ELSE MATTERS" - Possibly amusing rant.
My most worthless and most valuable coins: Comparing DIME and 42 - A discussion about interpreting spot price in context
[theory] Bitcoin discussion of hard forks - Talking about the risks involved with a hard fork
Rooting for LTC's Rally to Hold: Nyancoins and the Cryptocurrency Market - Nyancoins do not stand alone. Although it's easy to see the rise of another cryptocurrency as weakening us, because we might trade lower against them temporarily, I believe that a stronger CryptoCurrency market as a whole will be important for our long-term health.
[financial] Cryptocurrency valuation models: Considering Nyancoins as a zero-coupon bond against the community
Classic Posts
Why Nyancoin will hit $1/NYAN (and much more). We're going to space, and you're invited! - This is an infamous post by americanpegasus. I believe it was actually someone mocking him in /bitcoin by linking to this which first made me aware that Nyancoins existed, and got the idea in my head that it was a deadcoin (from seeing a post/comments on the sub at the time which claimed that). So the dream of this post was actually so bold that it brought it back from the grave, because it was bold enough to be mocked, and that mockery eventually led me to investigate it, and that investigation led me to fall in love.
1Ɲ >= 1Đ - This is a vision I have, that we shall rise above DOGE. This is not a dig against DOGE but merely a statement about the growth I expect to see us have. There are about 500x as many Dogecoins as there are Nyancoins, so even if we remain significantly smaller we can easily pass their unit price. We've done so briefly previously but are currently below this mark.
We choose to go to the Moon - This is my manifesto about why I am doing this. Cribbed from JFK's moon speech, it is meant to express that it is because of, not in spite of, the challenges that we face that I am here. This started out as a personal challenge. While I certainly would like to get rich off of this, the reason I chose to pursue this is because if we do then, then we're awesome badasses that people can be impressed by.
The original Nyancoins intro video - wasn't really sure where to categorize this
Older stories
I'll move stories down here as they get older. For now it's the block stoppage stuff as that seems to have stabilized.
Holy shit, 22 hours since the last block. At this rate, I'm going to have to start solving hashes by hand... - This was my post about the block stoppage.
Difficulty has spiked again; if we hit another stall I'll try the transaction fee trick again - Another block stoppage, and a record of my attempt to use the same trick to break it loose again (transaction fee incentive).
I'm ready to give up on life; in which coinaday finally has his full-blown mental breakdown. So long, and thanks for all the rainbows! - My personal mental breakdown. Just listed here because it made an impact. Also, it was an amazing response from the community which meant a lot to me.
Fuck it; encore une fois - My reaction afterward, saying that I'll give things another shot.
GFS
Disregard the below: GFS has been down for a few months and probably won't be back. At one point, this project had been offered to me, and perhaps I should have taken it, but I felt like I was already heavily committed here and couldn't take that on as well. It's a shame that no one managed to keep it running though. I really liked the idea.
Disregard the below: it's back down again, last I checked. Not sure what to link on that. The new bot got mildly political again / referenced being a shadowbanned user, and bam. I'm not sure where this is going to go now, if anywhere. Although I suppose the on-blockchain stuff isn't affected, and I'd wager go1dfish will do something again.
/GetFairShare will be attempting another distribution today; go try it out! - GetFairShare is back! Go get free money!
I don't really understand what's going on, but apparently the bot used for /GetFairShare got banned - Some background on GFS having gone down
I think that this will continue to be useful as we gain a larger and larger volume of posts and help me not have to worry about burying something significant posted a couple weeks back or something.
Also, right now I'm just gleaning from the frontpage, but I'll add in some great classic posts too.
Let me know in the comments if there are other posts you'd like to see added here.
submitted by coinaday to nyancoins [link] [comments]

Bitcoin Core 0.11.0 released | Wladimir J. van der Laan | Jul 12 2015

Wladimir J. van der Laan on Jul 12 2015:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512
Bitcoin Core version 0.11.0 is now available from:
<https://bitcoin.org/bin/bitcoin-core-0.11.0/>
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
<https://github.com/bitcoin/bitcoin/issues>
The entire distribution is also available as torrent:
magnet:?xt=urn:btih:82f0d2fa100d6db8a8c1338768dcb9e4e524da13&dn;=bitcoin-core-0.11.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F 
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrade warning
Because release 0.10.0 and later makes use of headers-first synchronization and
parallel block download (see further), the block files and databases are not
backwards-compatible with pre-0.10 versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility. There are no
known problems when downgrading from 0.11.x to 0.10.x.
Important information

Transaction flooding
At the time of this release, the P2P network is being flooded with low-fee
transactions. This causes a ballooning of the mempool size.
If this growth of the mempool causes problematic memory use on your node, it is
possible to change a few configuration options to work around this. The growth
of the mempool can be monitored with the RPC command getmempoolinfo.
One is to increase the minimum transaction relay fee minrelaytxfee, which
defaults to 0.00001. This will cause transactions with fewer BTC/kB fee to be
rejected, and thus fewer transactions entering the mempool.
The other is to restrict the relaying of free transactions with
limitfreerelay. This option sets the number of kB/minute at which
free transactions (with enough priority) will be accepted. It defaults to 15.
Reducing this number reduces the speed at which the mempool can grow due
to free transactions.
For example, add the following to bitcoin.conf:
minrelaytxfee=0.00005 limitfreerelay=5 
More robust solutions are being worked on for a follow-up release.
Notable changes

Block file pruning
This release supports running a fully validating node without maintaining a copy
of the raw block and undo data on disk. To recap, there are four types of data
related to the blockchain in the bitcoin system: the raw blocks as received over
the network (blk???.dat), the undo data (rev???.dat), the block index and the
UTXO set (both LevelDB databases). The databases are built from the raw data.
Block pruning allows Bitcoin Core to delete the raw block and undo data once
it's been validated and used to build the databases. At that point, the raw data
is used only to relay blocks to other nodes, to handle reorganizations, to look
up old transactions (if -txindex is enabled or via the RPC/REST interfaces), or
for rescanning the wallet. The block index continues to hold the metadata about
all blocks in the blockchain.
The user specifies how much space to allot for block & undo files. The minimum
allowed is 550MB. Note that this is in addition to whatever is required for the
block index and UTXO databases. The minimum was chosen so that Bitcoin Core will
be able to maintain at least 288 blocks on disk (two days worth of blocks at 10
minutes per block). In rare instances it is possible that the amount of space
used will exceed the pruning target in order to keep the required last 288
blocks on disk.
Block pruning works during initial sync in the same way as during steady state,
by deleting block files "as you go" whenever disk space is allocated. Thus, if
the user specifies 550MB, once that level is reached the program will begin
deleting the oldest block and undo files, while continuing to download the
blockchain.
For now, block pruning disables block relay. In the future, nodes with block
pruning will at a minimum relay "new" blocks, meaning blocks that extend their
active chain.
Block pruning is currently incompatible with running a wallet due to the fact
that block data is used for rescanning the wallet and importing keys or
addresses (which require a rescan.) However, running the wallet with block
pruning will be supported in the near future, subject to those limitations.
Block pruning is also incompatible with -txindex and will automatically disable
it.
Once you have pruned blocks, going back to unpruned state requires
re-downloading the entire blockchain. To do this, re-start the node with
  • -reindex. Note also that any problem that would cause a user to reindex (e.g.,
disk corruption) will cause a pruned node to redownload the entire blockchain.
Finally, note that when a pruned node reindexes, it will delete any blk???.dat
and rev???.dat files in the data directory prior to restarting the download.
To enable block pruning on the command line:
  • - -prune=N: where N is the number of MB to allot for raw block & undo data.
Modified RPC calls:
    • getblockchaininfo now includes whether we are in pruned mode or not.
    • getblock will check if the block's data has been pruned and if so, return an
error.
  • - getrawtransaction will no longer be able to locate a transaction that has a
UTXO but where its block file has been pruned.
Pruning is disabled by default.
Big endian support
Experimental support for big-endian CPU architectures was added in this
release. All little-endian specific code was replaced with endian-neutral
constructs. This has been tested on at least MIPS and PPC hosts. The build
system will automatically detect the endianness of the target.
Memory usage optimization
There have been many changes in this release to reduce the default memory usage
of a node, among which:
    • Accurate UTXO cache size accounting (#6102); this makes the option -dbcache
    precise where this grossly underestimated memory usage before
    • Reduce size of per-peer data structure (#6064 and others); this increases the
    number of connections that can be supported with the same amount of memory
    • Reduce the number of threads (#5964, #5679); lowers the amount of (esp.
    virtual) memory needed
Fee estimation changes
This release improves the algorithm used for fee estimation. Previously, -1
was returned when there was insufficient data to give an estimate. Now, -1
will also be returned when there is no fee or priority high enough for the
desired confirmation target. In those cases, it can help to ask for an estimate
for a higher target number of blocks. It is not uncommon for there to be no
fee or priority high enough to be reliably (85%) included in the next block and
for this reason, the default for -txconfirmtarget=n has changed from 1 to 2.
Privacy: Disable wallet transaction broadcast
This release adds an option -walletbroadcast=0 to prevent automatic
transaction broadcast and rebroadcast (#5951). This option allows separating
transaction submission from the node functionality.
Making use of this, third-party scripts can be written to take care of
transaction (re)broadcast:
    • Send the transaction as normal, either through RPC or the GUI
    • Retrieve the transaction data through RPC using gettransaction (NOT
    getrawtransaction). The hex field of the result will contain the raw
    hexadecimal representation of the transaction
    • The transaction can then be broadcasted through arbitrary mechanisms
    supported by the script
One such application is selective Tor usage, where the node runs on the normal
internet but transactions are broadcasted over Tor.
For an example script see [bitcoin-submittx](https://github.com/laanwj/bitcoin-submittx).
Privacy: Stream isolation for Tor
This release adds functionality to create a new circuit for every peer
connection, when the software is used with Tor. The new option,
-proxyrandomize, is on by default.
...[message truncated here by reddit bot]...
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-July/009400.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

Interested in contributing to the BTC community? Here is a exhaustive manual to get you up and running. (Only takes about 20-30 minutes if you are fluent in command prompt on linux).

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to rBitcoin [link] [comments]

Bitcoin Core 0.10.0 released | Wladimir | Feb 16 2015

Wladimir on Feb 16 2015:
Bitcoin Core version 0.10.0 is now available from:
https://bitcoin.org/bin/0.10.0/
This is a new major version release, bringing both new features and
bug fixes.
Please report bugs using the issue tracker at github:
https://github.com/bitcoin/bitcoin/issues
The whole distribution is also available as torrent:
https://bitcoin.org/bin/0.10.0/bitcoin-0.10.0.torrent
magnet:?xt=urn:btih:170c61fe09dafecfbb97cb4dccd32173383f4e68&dn;=0.10.0&tr;=udp%3A%2F%2Ftracker.openbittorrent.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.publicbt.com%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.ccc.de%3A80%2Fannounce&tr;=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969&tr;=udp%3A%2F%2Fopen.demonii.com%3A1337&ws;=https%3A%2F%2Fbitcoin.org%2Fbin%2F
Upgrading and downgrading

How to Upgrade
If you are running an older version, shut it down. Wait until it has completely
shut down (which might take a few minutes for older versions), then run the
installer (on Windows) or just copy over /Applications/Bitcoin-Qt (on Mac) or
bitcoind/bitcoin-qt (on Linux).
Downgrading warning
Because release 0.10.0 makes use of headers-first synchronization and parallel
block download (see further), the block files and databases are not
backwards-compatible with older versions of Bitcoin Core or other software:
  • Blocks will be stored on disk out of order (in the order they are
received, really), which makes it incompatible with some tools or
other programs. Reindexing using earlier versions will also not work
anymore as a result of this.
  • The block index database will now hold headers for which no block is
stored on disk, which earlier versions won't support.
If you want to be able to downgrade smoothly, make a backup of your entire data
directory. Without this your node will need start syncing (or importing from
bootstrap.dat) anew afterwards. It is possible that the data from a completely
synchronised 0.10 node may be usable in older versions as-is, but this is not
supported and may break as soon as the older version attempts to reindex.
This does not affect wallet forward or backward compatibility.
Notable changes

Faster synchronization
Bitcoin Core now uses 'headers-first synchronization'. This means that we first
ask peers for block headers (a total of 27 megabytes, as of December 2014) and
validate those. In a second stage, when the headers have been discovered, we
download the blocks. However, as we already know about the whole chain in
advance, the blocks can be downloaded in parallel from all available peers.
In practice, this means a much faster and more robust synchronization. On
recent hardware with a decent network link, it can be as little as 3 hours
for an initial full synchronization. You may notice a slower progress in the
very first few minutes, when headers are still being fetched and verified, but
it should gain speed afterwards.
A few RPCs were added/updated as a result of this:
  • getblockchaininfo now returns the number of validated headers in addition to
the number of validated blocks.
  • getpeerinfo lists both the number of blocks and headers we know we have in
common with each peer. While synchronizing, the heights of the blocks that we
have requested from peers (but haven't received yet) are also listed as
'inflight'.
  • A new RPC getchaintips lists all known branches of the block chain,
including those we only have headers for.
Transaction fee changes
This release automatically estimates how high a transaction fee (or how
high a priority) transactions require to be confirmed quickly. The default
settings will create transactions that confirm quickly; see the new
'txconfirmtarget' setting to control the tradeoff between fees and
confirmation times. Fees are added by default unless the 'sendfreetransactions'
setting is enabled.
Prior releases used hard-coded fees (and priorities), and would
sometimes create transactions that took a very long time to confirm.
Statistics used to estimate fees and priorities are saved in the
data directory in the fee_estimates.dat file just before
program shutdown, and are read in at startup.
New command line options for transaction fee changes:
  • -txconfirmtarget=n : create transactions that have enough fees (or priority)
so they are likely to begin confirmation within n blocks (default: 1). This setting
is over-ridden by the -paytxfee option.
  • -sendfreetransactions : Send transactions as zero-fee transactions if possible
(default: 0)
New RPC commands for fee estimation:
  • estimatefee nblocks : Returns approximate fee-per-1,000-bytes needed for
a transaction to begin confirmation within nblocks. Returns -1 if not enough
transactions have been observed to compute a good estimate.
  • estimatepriority nblocks : Returns approximate priority needed for
a zero-fee transaction to begin confirmation within nblocks. Returns -1 if not
enough free transactions have been observed to compute a good
estimate.
RPC access control changes
Subnet matching for the purpose of access control is now done
by matching the binary network address, instead of with string wildcard matching.
For the user this means that -rpcallowip takes a subnet specification, which can be
  • a single IP address (e.g. 1.2.3.4 or fe80::0012:3456:789a:bcde)
  • a network/CIDR (e.g. 1.2.3.0/24 or fe80::0000/64)
  • a network/netmask (e.g. 1.2.3.4/255.255.255.0 or fe80::0012:3456:789a:bcde/ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff)
An arbitrary number of -rpcallow arguments can be given. An incoming connection will be accepted if its origin address
matches one of them.
For example:
| 0.9.x and before | 0.10.x |
|--------------------------------------------|---------------------------------------|
| -rpcallowip=192.168.1.1 | -rpcallowip=192.168.1.1 (unchanged) |
| -rpcallowip=192.168.1.* | -rpcallowip=192.168.1.0/24 |
| -rpcallowip=192.168.* | -rpcallowip=192.168.0.0/16 |
| -rpcallowip=* (dangerous!) | -rpcallowip=::/0 (still dangerous!) |
Using wildcards will result in the rule being rejected with the following error in debug.log:
 Error: Invalid -rpcallowip subnet specification: *. Valid are a single IP (e.g. 1.2.3.4), a network/netmask (e.g. 1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). 
REST interface
A new HTTP API is exposed when running with the -rest flag, which allows
unauthenticated access to public node data.
It is served on the same port as RPC, but does not need a password, and uses
plain HTTP instead of JSON-RPC.
Assuming a local RPC server running on port 8332, it is possible to request:
In every case, EXT can be bin (for raw binary data), hex (for hex-encoded
binary) or json.
For more details, see the doc/REST-interface.md document in the repository.
RPC Server "Warm-Up" Mode
The RPC server is started earlier now, before most of the expensive
intialisations like loading the block index. It is available now almost
immediately after starting the process. However, until all initialisations
are done, it always returns an immediate error with code -28 to all calls.
This new behaviour can be useful for clients to know that a server is already
started and will be available soon (for instance, so that they do not
have to start it themselves).
Improved signing security
For 0.10 the security of signing against unusual attacks has been
improved by making the signatures constant time and deterministic.
This change is a result of switching signing to use libsecp256k1
instead of OpenSSL. Libsecp256k1 is a cryptographic library
optimized for the curve Bitcoin uses which was created by Bitcoin
Core developer Pieter Wuille.
There exist attacks[1] against most ECC implementations where an
attacker on shared virtual machine hardware could extract a private
key if they could cause a target to sign using the same key hundreds
of times. While using shared hosts and reusing keys are inadvisable
for other reasons, it's a better practice to avoid the exposure.
OpenSSL has code in their source repository for derandomization
and reduction in timing leaks that we've eagerly wanted to use for a
long time, but this functionality has still not made its
way into a released version of OpenSSL. Libsecp256k1 achieves
significantly stronger protection: As far as we're aware this is
the only deployed implementation of constant time signing for
the curve Bitcoin uses and we have reason to believe that
libsecp256k1 is better tested and more thoroughly reviewed
than the implementation in OpenSSL.
[1] https://eprint.iacr.org/2014/161.pdf
Watch-only wallet support
The wallet can now track transactions to and from wallets for which you know
all addresses (or scripts), even without the private keys.
This can be used to track payments without needing the private keys online on a
possibly vulnerable system. In addition, it can help for (manual) construction
of multisig transactions where you are only one of the signers.
One new RPC, importaddress, is added which functions similarly to
importprivkey, but instead takes an address or script (in hexadecimal) as
argument. After using it, outputs credited to this address or script are
considered to be received, and transactions consuming these outputs will be
considered to be sent.
The following RPCs have optional support for watch-only:
getbalance, listreceivedbyaddress, listreceivedbyaccount,
listtransactions, listaccounts, listsinceblock, gettransaction. See the
RPC documentation for those methods for more information.
Compared to using getrawtransaction, this mechanism does not require
-txindex, scales better, integrates better with the wallet, and is compatible
with future block chain pruning functionality. It does mean that all relevant
addresses need to added to the wallet before the payment, though.
Consensus library
Starting from 0.10.0, the Bitcoin Core distribution includes a consensus library.
The purpose of this library is to make the verification functionality that is
critical to Bitcoin's consensus available to other applications, e.g. to language
bindings such as [python-bitcoinlib](https://pypi.python.org/pypi/python-bitcoinlib) or
alternative node implementations.
This library is called libbitcoinconsensus.so (or, .dll for Windows).
Its interface is defined in the C header [bitcoinconsensus.h](https://github.com/bitcoin/bitcoin/blob/0.10/src/script/bitcoinconsensus.h).
In its initial version the API includes two functions:
  • bitcoinconsensus_verify_script verifies a script. It returns whether the indicated input of the provided serialized transaction
correctly spends the passed scriptPubKey under additional constraints indicated by flags
  • bitcoinconsensus_version returns the API version, currently at an experimental 0
The functionality is planned to be extended to e.g. UTXO management in upcoming releases, but the interface
for existing methods should remain stable.
Standard script rules relaxed for P2SH addresses
The IsStandard() rules have been almost completely removed for P2SH
redemption scripts, allowing applications to make use of any valid
script type, such as "n-of-m OR y", hash-locked oracle addresses, etc.
While the Bitcoin protocol has always supported these types of script,
actually using them on mainnet has been previously inconvenient as
standard Bitcoin Core nodes wouldn't relay them to miners, nor would
most miners include them in blocks they mined.
bitcoin-tx
It has been observed that many of the RPC functions offered by bitcoind are
"pure functions", and operate independently of the bitcoind wallet. This
included many of the RPC "raw transaction" API functions, such as
createrawtransaction.
bitcoin-tx is a newly introduced command line utility designed to enable easy
manipulation of bitcoin transactions. A summary of its operation may be
obtained via "bitcoin-tx --help" Transactions may be created or signed in a
manner similar to the RPC raw tx API. Transactions may be updated, deleting
inputs or outputs, or appending new inputs and outputs. Custom scripts may be
easily composed using a simple text notation, borrowed from the bitcoin test
suite.
This tool may be used for experimenting with new transaction types, signing
multi-party transactions, and many other uses. Long term, the goal is to
deprecate and remove "pure function" RPC API calls, as those do not require a
server round-trip to execute.
Other utilities "bitcoin-key" and "bitcoin-script" have been proposed, making
key and script operations easily accessible via command line.
Mining and relay policy enhancements
Bitcoin Core's block templates are now for version 3 blocks only, and any mining
software relying on its getblocktemplate must be updated in parallel to use
libblkmaker either version 0.4.2 or any version from 0.5.1 onward.
If you are solo mining, this will affect you the moment you upgrade Bitcoin
Core, which must be done prior to BIP66 achieving its 951/1001 status.
If you are mining with the stratum mining protocol: this does not affect you.
If you are mining with the getblocktemplate protocol to a pool: this will affect
you at the pool operator's discretion, which must be no later than BIP66
achieving its 951/1001 status.
The prioritisetransaction RPC method has been added to enable miners to
manipulate the priority of transactions on an individual basis.
Bitcoin Core now supports BIP 22 long polling, so mining software can be
notified immediately of new templates rather than having to poll periodically.
Support for BIP 23 block proposals is now available in Bitcoin Core's
getblocktemplate method. This enables miners to check the basic validity of
their next block before expending work on it, reducing risks of accidental
hardforks or mining invalid blocks.
Two new options to control mining policy:
  • -datacarrier=0/1 : Relay and mine "data carrier" (OP_RETURN) transactions
if this is 1.
  • -datacarriersize=n : Maximum size, in bytes, we consider acceptable for
"data carrier" outputs.
The relay policy has changed to more properly implement the desired behavior of not
relaying free (or very low fee) transactions unless they have a priority above the
AllowFreeThreshold(), in which case they are relayed subject to the rate limiter.
BIP 66: strict DER encoding for signatures
Bitcoin Core 0.10 implements BIP 66, which introduces block version 3, and a new
consensus rule, which prohibits non-DER signatures. Such transactions have been
non-standard since Bitcoin v0.8.0 (released in February 2013), but were
technically still permitted inside blocks.
This change breaks the dependency on OpenSSL's signature parsing, and is
required if implementations would want to remove all of OpenSSL from the
consensus code.
The same miner-voting mechanism as in BIP 34 is used: when 751 out of a
sequence of 1001 blocks have version number 3 or higher, the new consensus
rule becomes active for those blocks. When 951 out of a sequence of 1001
blocks have version number 3 or higher, it becomes mandatory for all blocks.
Backward compatibility with current mining software is NOT provided, thus miners
should read the first paragraph of "Mining and relay policy enhancements" above.
0.10.0 Change log

Detailed release notes follow. This overview includes changes that affect external
behavior, not code moves, refactors or string updates.
RPC:
  • f923c07 Support IPv6 lookup in bitcoin-cli even when IPv6 only bound on localhost
  • b641c9c Fix addnode "onetry": Connect with OpenNetworkConnection
  • 171ca77 estimatefee / estimatepriority RPC methods
  • b750cf1 Remove cli functionality from bitcoind
  • f6984e8 Add "chain" to getmininginfo, improve help in getblockchaininfo
  • 99ddc6c Add nLocalServices info to RPC getinfo
  • cf0c47b Remove getwork() RPC call
  • 2a72d45 prioritisetransaction
  • e44fea5 Add an option -datacarrier to allow users to disable relaying/mining data carrier transactions
  • 2ec5a3d Prevent easy RPC memory exhaustion attack
  • d4640d7 Added argument to getbalance to include watchonly addresses and fixed errors in balance calculation
  • 83f3543 Added argument to listaccounts to include watchonly addresses
  • 952877e Showing 'involvesWatchonly' property for transactions returned by 'listtransactions' and 'listsinceblock'. It is only appended when the transaction involves a watchonly address
  • d7d5d23 Added argument to listtransactions and listsinceblock to include watchonly addresses
  • f87ba3d added includeWatchonly argument to 'gettransaction' because it affects balance calculation
  • 0fa2f88 added includedWatchonly argument to listreceivedbyaddress/...account
  • 6c37f7f getrawchangeaddress: fail when keypool exhausted and wallet locked
  • ff6a7af getblocktemplate: longpolling support
  • c4a321f Add peerid to getpeerinfo to allow correlation with the logs
  • 1b4568c Add vout to ListTransactions output
  • b33bd7a Implement "getchaintips" RPC command to monitor blockchain forks
  • 733177e Remove size limit in RPC client, keep it in server
  • 6b5b7cb Categorize rpc help overview
  • 6f2c26a Closely track mempool byte total. Add "getmempoolinfo" RPC
  • aa82795 Add detailed network info to getnetworkinfo RPC
  • 01094bd Don't reveal whether password is <20 or >20 characters in RPC
  • 57153d4 rpc: Compute number of confirmations of a block from block height
  • ff36cbe getnetworkinfo: export local node's client sub-version string
  • d14d7de SanitizeString: allow '(' and ')'
  • 31d6390 Fixed setaccount accepting foreign address
  • b5ec5fe update getnetworkinfo help with subversion
  • ad6e601 RPC additions after headers-first
  • 33dfbf5 rpc: Fix leveldb iterator leak, and flush before gettxoutsetinfo
  • 2aa6329 Enable customising node policy for datacarrier data size with a -datacarriersize option
  • f877aaa submitblock: Use a temporary CValidationState to determine accurately the outcome of ProcessBlock
  • e69a587 submitblock: Support for returning specific rejection reasons
  • af82884 Add "warmup mode" for RPC server
  • e2655e0 Add unauthenticated HTTP REST interface to public blockchain data
  • 683dc40 Disable SSLv3 (in favor of TLS) for the RPC client and server
  • 44b4c0d signrawtransaction: validate private key
  • 9765a50 Implement BIP 23 Block Proposal
  • f9de17e Add warning comment to getinfo
Command-line options:
  • ee21912 Use netmasks instead of wildcards for IP address matching
  • deb3572 Add -rpcbind option to allow binding RPC port on a specific interface
  • 96b733e Add -version option to get just the version
  • 1569353 Add -stopafterblockimport option
  • 77cbd46 Let -zapwallettxes recover transaction meta data
  • 1c750db remove -tor compatibility code (only allow -onion)
  • 4aaa017 rework help messages for fee-related options
  • 4278b1d Clarify error message when invalid -rpcallowip
  • 6b407e4 -datadir is now allowed in config files
  • bdd5b58 Add option -sysperms to disable 077 umask (create new files with system default umask)
  • cbe39a3 Add "bitcoin-tx" command line utility and supporting modules
  • dbca89b Trigger -alertnotify if network is upgrading without you
  • ad96e7c Make -reindex cope with out-of-order blocks
  • 16d5194 Skip reindexed blocks individually
  • ec01243 --tracerpc option for regression tests
  • f654f00 Change -genproclimit default to 1
  • 3c77714 Make -proxy set all network types, avoiding a connect leak
  • 57be955 Remove -printblock, -printblocktree, and -printblockindex
  • ad3d208 remove -maxorphanblocks config parameter since it is no longer functional
Block and transaction handling:
  • 7a0e84d ProcessGetData(): abort if a block file is missing from disk
  • 8c93bf4 LoadBlockIndexDB(): Require block db reindex if any blk*.dat files are missing
  • 77339e5 Get rid of the static chainMostWork (optimization)
  • 4e0eed8 Allow ActivateBestChain to release its lock on cs_main
  • 18e7216 Push cs_mains down in ProcessBlock
  • fa126ef Avoid undefined behavior using CFlatData in CScript serialization
  • 7f3b4e9 Relax IsStandard rules for pay-to-script-hash transactions
  • c9a0918 Add a skiplist to the CBlockIndex structure
  • bc42503 Use unordered_map for CCoinsViewCache with salted hash (optimization)
  • d4d3fbd Do not flush the cache after every block outside of IBD (optimization)
  • ad08d0b Bugfix: make CCoinsViewMemPool support pruned entries in underlying cache
  • 5734d4d Only remove actualy failed blocks from setBlockIndexValid
  • d70bc52 Rework block processing benchmark code
  • 714a3e6 Only keep setBlockIndexValid entries that are possible improvements
  • ea100c7 Reduce maximum coinscache size during verification (reduce memory usage)
  • 4fad8e6 Reject transactions with excessive numbers of sigops
  • b0875eb Allow BatchWrite to destroy its input, reducing copying (optimization)
  • 92bb6f2 Bypass reloading blocks from disk (optimization)
  • 2e28031 Perform CVerifyDB on pcoinsdbview instead of pcoinsTip (reduce memory usage)
  • ab15b2e Avoid copying undo data (optimization)
  • 341735e Headers-first synchronization
  • afc32c5 Fix rebuild-chainstate feature and improve its performance
  • e11b2ce Fix large reorgs
  • ed6d1a2 Keep information about all block files in memory
  • a48f2d6 Abstract context-dependent block checking from acceptance
  • 7e615f5 Fixed mempool sync after sending a transaction
  • 51ce901 Improve chainstate/blockindex disk writing policy
  • a206950 Introduce separate flushing modes
  • 9ec75c5 Add a locking mechanism to IsInitialBlockDownload to ensure it never goes from false to true
  • 868d041 Remove coinbase-dependant transactions during reorg
  • 723d12c Remove txn which are invalidated by coinbase maturity during reorg
  • 0cb8763 Check against MANDATORY flags prior to accepting to mempool
  • 8446262 Reject headers that build on an invalid parent
  • 008138c Bugfix: only track UTXO modification after lookup
P2P protocol and network code:
  • f80cffa Do not trigger a DoS ban if SCRIPT_VERIFY_NULLDUMMY fails
  • c30329a Add testnet DNS seed of Alex Kotenko
  • 45a4baf Add testnet DNS seed of Andreas Schildbach
  • f1920e8 Ping automatically every 2 minutes (unconditionally)
  • 806fd19 Allocate receive buffers in on the fly
  • 6ecf3ed Display unknown commands received
  • aa81564 Track peers' available blocks
  • caf6150 Use async name resolving to improve net thread responsiveness
  • 9f4da19 Use pong receive time rather than processing time
  • 0127a9b remove SOCKS4 support from core and GUI, use SOCKS5
  • 40f5cb8 Send rejects and apply DoS scoring for errors in direct block validation
  • dc942e6 Introduce whitelisted peers
  • c994d2e prevent SOCKET leak in BindListenPort()
  • a60120e Add built-in seeds for .onion
  • 60dc8e4 Allow -onlynet=onion to be used
  • 3a56de7 addrman: Do not propagate obviously poor addresses onto the network
  • 6050ab6 netbase: Make SOCKS5 negotiation interruptible
  • 604ee2a Remove tx from AlreadyAskedFor list once we receive it, not when we process it
  • efad808 Avoid reject message feedback loops
  • 71697f9 Separate protocol versioning from clientversion
  • 20a5f61 Don't relay alerts to peers before version negotiation
  • b4ee0bd Introduce preferred download peers
  • 845c86d Do not use third party services for IP detection
  • 12a49ca Limit the number of new addressses to accumulate
  • 35e408f Regard connection failures as attempt for addrman
  • a3a7317 Introduce 10 minute block download timeout
  • 3022e7d Require sufficent priority for relay of free transactions
  • 58fda4d Update seed IPs, based on bitcoin.sipa.be crawler data
  • 18021d0 Remove bitnodes.io from dnsseeds.
Validation:
  • 6fd7ef2 Also switch the (unused) verification code to low-s instead of even-s
  • 584a358 Do merkle root and txid duplicates check simultaneously
  • 217a5c9 When transaction outputs exceed inputs, show the offending amounts so as to aid debugging
  • f74fc9b Print input index when signature validation fails, to aid debugging
  • 6fd59ee script.h: set_vch() should shift a >32 bit value
  • d752ba8 Add SCRIPT_VERIFY_SIGPUSHONLY (BIP62 rule 2) (test only)
  • 698c6ab Add SCRIPT_VERIFY_MINIMALDATA (BIP62 rules 3 and 4) (test only)
  • ab9edbd script: create sane error return codes for script validation and remove logging
  • 219a147 script: check ScriptError values in script tests
  • 0391423 Discourage NOPs reserved for soft-fork upgrades
  • 98b135f Make STRICTENC invalid pubkeys fail the script rather than the opcode
  • 307f7d4 Report script evaluation failures in log and reject messages
  • ace39db consensus: guard against openssl's new strict DER checks
  • 12b7c44 Improve robustness of DER recoding code
  • 76ce5c8 fail immediately on an empty signature
Build system:
  • f25e3ad Fix build in OS X 10.9
  • 65e8ba4 build: Switch to non-recursive make
  • 460b32d build: fix broken boost chrono check on some platforms
  • 9ce0774 build: Fix windows configure when using --with-qt-libdir
  • ea96475 build: Add mention of --disable-wallet to bdb48 error messages
  • 1dec09b depends: add shared dependency builder
  • c101c76 build: Add --with-utils (bitcoin-cli and bitcoin-tx, default=yes). Help string consistency tweaks. Target sanity check fix
  • e432a5f build: add option for reducing exports (v2)
  • 6134b43 Fixing condition 'sabotaging' MSVC build
  • af0bd5e osx: fix signing to make Gatekeeper happy (again)
  • a7d1f03 build: fix dynamic boost check when --with-boost= is used
  • d5fd094 build: fix qt test build when libprotobuf is in a non-standard path
  • 2cf5f16 Add libbitcoinconsensus library
  • 914868a build: add a deterministic dmg signer
  • 2d375fe depends: bump openssl to 1.0.1k
  • b7a4ecc Build: Only check for boost when building code that requires it
Wallet:
  • b33d1f5 Use fee/priority estimates in wallet CreateTransaction
  • 4b7b1bb Sanity checks for estimates
  • c898846 Add support for watch-only addresses
  • d5087d1 Use script matching rather than destination matching for watch-only
  • d88af56 Fee fixes
  • a35b55b Dont run full check every time we decrypt wallet
  • 3a7c348 Fix make_change to not create half-satoshis
  • f606bb9 fix a possible memory leak in CWalletDB::Recover
  • 870da77 fix possible memory leaks in CWallet::EncryptWallet
  • ccca27a Watch-only fixes
  • 9b1627d [Wallet] Reduce minTxFee for transaction creation to 1000 satoshis
  • a53fd41 Deterministic signing
  • 15ad0b5 Apply AreSane() checks to the fees from the network
  • 11855c1 Enforce minRelayTxFee on wallet created tx and add a maxtxfee option
GUI:
  • c21c74b osx: Fix missing dock menu with qt5
  • b90711c Fix Transaction details shows wrong To:
  • 516053c Make links in 'About Bitcoin Core' clickable
  • bdc83e8 Ensure payment request network matches client network
  • 65f78a1 Add GUI view of peer information
  • 06a91d9 VerifyDB progress reporting
  • fe6bff2 Add BerkeleyDB version info to RPCConsole
  • b917555 PeerTableModel: Fix potential deadlock. #4296
  • dff0e3b Improve rpc console history behavior
  • 95a9383 Remove CENT-fee-rule from coin control completely
  • 56b07d2 Allow setting listen via GUI
  • d95ba75 Log messages with type>QtDebugMsg as non-debug
  • 8969828 New status bar Unit Display Control and related changes
  • 674c070 seed OpenSSL PNRG with Windows event data
  • 509f926 Payment request parsing on startup now only changes network if a valid network name is specified
  • acd432b Prevent balloon-spam after rescan
  • 7007402 Implement SI-style (thin space) thoudands separator
  • 91cce17 Use fixed-point arithmetic in amount spinbox
  • bdba2dd Remove an obscure option no-one cares about
  • bd0aa10 Replace the temporary file hack currently used to change Bitcoin-Qt's dock icon (OS X) with a buffer-based solution
  • 94e1b9e Re-work overviewpage UI
  • 8bfdc9a Better looking trayicon
  • b197bf3 disable tray interactions when client model set to 0
  • 1c5f0af Add column Watch-only to transactions list
  • 21f139b Fix tablet crash. closes #4854
  • e84843c Broken addresses on command line no longer trigger testnet
  • a49f11d Change splash screen to normal window
  • 1f9be98 Disable App Nap on OSX 10.9+
  • 27c3e91 Add proxy to options overridden if necessary
  • 4bd1185 Allow "emergency" shutdown during startup
  • d52f072 Don't show wallet options in the preferences menu when running with -disablewallet
  • 6093aa1 Qt: QProgressBar CPU-Issue workaround
  • 0ed9675 [Wallet] Add global boolean whether to send free transactions (default=true)
  • ed3e5e4 [Wallet] Add global boolean whether to pay at least the custom fee (default=true)
  • e7876b2 [Wallet] Prevent user from paying a non-sense fee
  • c1c9d5b Add Smartfee to GUI
  • e0a25c5 Make askpassphrase dialog behave more sanely
  • 94b362d On close of splashscreen interrupt verifyDB
  • b790d13 English translation update
  • 8543b0d Correct tooltip on address book page
Tests:
  • b41e594 Fix script test handling of empty scripts
  • d3a33fc Test CHECKMULTISIG with m == 0 and n == 0
  • 29c1749 Let tx (in)valid tests use any SCRIPT_VERIFY flag
  • 6380180 Add rejection of non-null CHECKMULTISIG dummy values
  • 21bf3d2 Add tests for BoostAsioToCNetAddr
  • b5ad5e7 Add Python test for -rpcbind and -rpcallowip
  • 9ec0306 Add CODESEPARATOFindAndDelete() tests
  • 75ebced Added many rpc wallet tests
  • 0193fb8 Allow multiple regression tests to run at once
  • 92a6220 Hook up sanity checks
  • 3820e01 Extend and move all crypto tests to crypto_tests.cpp
  • 3f9a019 added list/get received by address/ account tests
  • a90689f Remove timing-based signature cache unit test
  • 236982c Add skiplist unit tests
  • f4b00be Add CChain::GetLocator() unit test
  • b45a6e8 Add test for getblocktemplate longpolling
  • cdf305e Set -discover=0 in regtest framework
  • ed02282 additional test for OP_SIZE in script_valid.json
  • 0072d98 script tests: BOOLAND, BOOLOR decode to integer
  • 833ff16 script tests: values that overflow to 0 are true
  • 4cac5db script tests: value with trailing 0x00 is true
  • 89101c6 script test: test case for 5-byte bools
  • d2d9dc0 script tests: add tests for CHECKMULTISIG limits
  • d789386 Add "it works" test for bitcoin-tx
  • df4d61e Add bitcoin-tx tests
  • aa41ac2 Test IsPushOnly() with invalid push
  • 6022b5d Make script_{valid,invalid}.json validation flags configurable
  • 8138cbe Add automatic script test generation, and actual checksig tests
  • ed27e53 Add coins_tests with a large randomized CCoinViewCache test
  • 9df9cf5 Make SCRIPT_VERIFY_STRICTENC compatible with BIP62
  • dcb9846 Extend getchaintips RPC test
  • 554147a Ensure MINIMALDATA invalid tests can only fail one way
  • dfeec18 Test every numeric-accepting opcode for correct handling of the numeric minimal encoding rule
  • 2b62e17 Clearly separate PUSHDATA and numeric argument MINIMALDATA tests
  • 16d78bd Add valid invert of invalid every numeric opcode tests
  • f635269 tests: enable alertnotify test for Windows
  • 7a41614 tests: allow rpc-tests to get filenames for bitcoind and bitcoin-cli from the environment
  • 5122ea7 tests: fix forknotify.py on windows
  • fa7f8cd tests: remove old pull-tester scripts
  • 7667850 tests: replace the old (unused since Travis) tests with new rpc test scripts
  • f4e0aef Do signature-s negation inside the tests
  • 1837987 Optimize -regtest setgenerate block generation
  • 2db4c8a Fix node ranges in the test framework
  • a8b2ce5 regression test only setmocktime RPC call
  • daf03e7 RPC tests: create initial chain with specific timestamps
  • 8656dbb Port/fix txnmall.sh regression test
  • ca81587 Test the exact order of CHECKMULTISIG sig/pubkey evaluation
  • 7357893 Prioritize and display -testsafemode status in UI
  • f321d6b Add key generation/verification to ECC sanity check
  • 132ea9b miner_tests: Disable checkpoints so they don't fail the subsidy-change test
  • bc6cb41 QA RPC tests: Add tests block block proposals
  • f67a9ce Use deterministically generated script tests
  • 11d7a7d [RPC] add rpc-test for http keep-alive (persistent connections)
  • 34318d7 RPC-test based on invalidateblock for mempool coinbase spends
  • 76ec867 Use actually valid transactions for script tests
  • c8589bf Add actual signature tests
  • e2677d7 Fix smartfees test for change to relay policy
  • 263b65e tests: run sanity checks in tests too
Miscellaneous:
  • 122549f Fix incorrect checkpoint data for testnet3
  • 5bd02cf Log used config file to debug.log on startup
  • 68ba85f Updated Debian example bitcoin.conf with config from wiki + removed some cruft and updated comments
  • e5ee8f0 Remove -beta suffix
  • 38405ac Add comment regarding experimental-use service bits
  • be873f6 Issue warning if collecting RandSeed data failed
  • 8ae973c Allocate more space if necessary in RandSeedAddPerfMon
  • 675bcd5 Correct comment for 15-of-15 p2sh script size
  • fda3fed libsecp256k1 integration
  • 2e36866 Show nodeid instead of addresses in log (for anonymity) unless otherwise requested
  • cd01a5e Enable paranoid corruption checks in LevelDB >= 1.16
  • 9365937 Add comment about never updating nTimeOffset past 199 samples
  • 403c1bf contrib: remove getwork-based pyminer (as getwork API call has been removed)
  • 0c3e101 contrib: Added systemd .service file in order to help distributions integrate bitcoind
  • 0a0878d doc: Add new DNSseed policy
  • 2887bff Update coding style and add .clang-format
  • 5cbda4f Changed LevelDB cursors to use scoped pointers to ensure destruction when going out of scope
  • b4a72a7 contrib/linearize: split output files based on new-timestamp-year or max-file-size
  • e982b57 Use explicit fflush() instead of setvbuf()
  • 234bfbf contrib: Add init scripts and docs for Upstart and OpenRC
  • 01c2807 Add warning about the merkle-tree algorithm duplicate txid flaw
  • d6712db Also create pid file in non-daemon mode
  • 772ab0e contrib: use batched JSON-RPC in linarize-hashes (optimization)
  • 7ab4358 Update bash-completion for v0.10
  • 6e6a36c contrib: show pull # in prompt for github-merge script
  • 5b9f842 Upgrade leveldb to 1.18, make chainstate databases compatible between ARM and x86 (issue #2293)
  • 4e7c219 Catch UTXO set read errors and shutdown
  • 867c600 Catch LevelDB errors during flush
  • 06ca065 Fix CScriptID(const CScript& in) in empty script case
Credits

Thanks to everyone who contributed to this release:
  • 21E14
  • Adam Weiss
  • Aitor Pazos
  • Alexander Jeng
  • Alex Morcos
  • Alon Muroch
  • Andreas Schildbach
  • Andrew Poelstra
  • Andy Alness
  • Ashley Holman
  • Benedict Chan
  • Ben Holden-Crowther
  • Bryan Bishop
  • BtcDrak
  • Christian von Roques
  • Clinton Christian
  • Cory Fields
  • Cozz Lovan
  • daniel
  • Daniel Kraft
  • David Hill
  • Derek701
  • dexX7
  • dllud
  • Dominyk Tiller
  • Doug
  • elichai
  • elkingtowa
  • ENikS
  • Eric Shaw
  • Federico Bond
  • Francis GASCHET
  • Gavin Andresen
  • Giuseppe Mazzotta
  • Glenn Willen
  • Gregory Maxwell
  • gubatron
  • HarryWu
  • himynameismartin
  • Huang Le
  • Ian Carroll
  • imharrywu
  • Jameson Lopp
  • Janusz Lenar
  • JaSK
  • Jeff Garzik
  • JL2035
  • Johnathan Corgan
  • Jonas Schnelli
  • jtimon
  • Julian Haight
  • Kamil Domanski
  • kazcw
  • kevin
  • kiwigb
  • Kosta Zertsekel
  • LongShao007
  • Luke Dashjr
  • Mark Friedenbach
  • Mathy Vanvoorden
  • Matt Corallo
  • Matthew Bogosian
  • Micha
  • Michael Ford
  • Mike Hearn
  • mrbandrews
  • mruddy
  • ntrgn
  • Otto Allmendinger
  • paveljanik
  • Pavel Vasin
  • Peter Todd
  • phantomcircuit
  • Philip Kaufmann
  • Pieter Wuille
  • pryds
  • randy-waterhouse
  • R E Broadley
  • Rose Toomey
  • Ross Nicoll
  • Roy Badami
  • Ruben Dario Ponticelli
  • Rune K. Svendsen
  • Ryan X. Charles
  • Saivann
  • sandakersmann
  • SergioDemianLerner
  • shshshsh
  • sinetek
  • Stuart Cardall
  • Suhas Daftuar
  • Tawanda Kembo
  • Teran McKinney
  • tm314159
  • Tom Harding
  • Trevin Hofmann
  • Whit J
  • Wladimir J. van der Laan
  • Yoichi Hirai
  • Zak Wilcox
As well as everyone that helped translating on [Transifex](https://www.transifex.com/projects/p/bitcoin/).
Also lots of thanks to the bitcoin.org website team David A. Harding and Saivann Carignan.
Wladimir
original: http://lists.linuxfoundation.org/pipermail/bitcoin-dev/2015-February/007480.html
submitted by bitcoin-devlist-bot to bitcoin_devlist [link] [comments]

Running a full node using Bitcoin-daemon. Instructions for Linux.

These instructions will work both on a VPS cloud server or a personal computer. You may find cheap VPS somewhere online for rent.
What Is A Full Node?
A full node is a program that fully validates transactions and blocks. Almost all full nodes also help the network by accepting transactions and blocks from other full nodes, validating those transactions and blocks, and then relaying them to further full nodes.
Most full nodes also serve lightweight clients by allowing them to transmit their transactions to the network and by notifying them when a transaction affects their wallet. If not enough nodes perform this function, clients won’t be able to connect through the peer-to-peer network—they’ll have to use centralized services instead.
Many people and organizations volunteer to run full nodes using spare computing and bandwidth resources—but more volunteers are needed to allow Bitcoin to continue to grow. This document describes how you can help and what helping will cost you.
Costs And Warnings
Running a Bitcoin full node comes with certain costs and can expose you to certain risks. This section will explain those costs and risks so you can decide whether you’re able to help the network.
Special Cases
Miners, businesses, and privacy-conscious users rely on particular behavior from the full nodes they use, so they will often run their own full nodes and take special safety precautions. This document does not cover those precautions—it only describes running a full node to help support the Bitcoin network in general.
Please consult an expert if you need help setting up your full node correctly to handle high-value and privacy-sensitive tasks.
Secure Your Wallet
It’s possible and safe to run a full node to support the network and use its wallet to store your bitcoins, but you must take the same precautions you would when using any Bitcoin wallet. Please see the securing your wallet page for more information.
Minimum Requirements
Bitcoin Core full nodes have certain requirements. If you try running a node on weak hardware, it may work—but you’ll likely spend more time dealing with issues. If you can meet the following requirements, you’ll have an easy-to-use node.
Note: many operating systems today (Windows, Mac, and Linux) enter a low-power mode after the screensaver activates, slowing or halting network traffic. This is often the default setting on laptops and on all Mac OS X laptops and desktops. Check your screensaver settings and disable automatic “sleep” or “suspend” options to ensure you support the network whenever your computer is running.
Possible Problems
Legal: Bitcoin use is prohibited or restricted in some areas.
Bandwidth limits: Some Internet plans will charge an additional amount for any excess upload bandwidth used that isn’t included in the plan. Worse, some providers may terminate your connection without warning because of overuse. We advise that you check whether your Internet connection is subjected to such limitations and monitor your bandwidth use so that you can stop Bitcoin Core before you reach your upload limit.
Anti-virus: Several people have placed parts of known computer viruses in the Bitcoin block chain. This block chain data can’t infect your computer, but some anti-virus programs quarantine the data anyway, making it more difficult to run a full node. This problem mostly affects computers running Windows.
Attack target: People who want to disrupt the Bitcoin network may attack full nodes in ways that will affect other things you do with your computer, such as an attack that limits your available download bandwidth or an attack that prevents you from using your full node’s wallet for sending transactions.
Linux Instructions
The following instructions describe installing Bitcoin Core on Linux systems.
Ubuntu 14.10 Instructions for Bitcoin Core 0.10.0.
If you use Ubuntu Desktop, click the Ubuntu swirl icon to start the Dash and type “term” into the input box. Choose any one of the terminals listed:
Alternatively, access a console or terminal emulator using another method, such as SSH on Ubuntu Server or a terminal launcher in an alternative desktop environment.
Type the following line to add the Bitcoin Personal Package Archive (PPA) to your system:
sudo apt-add-repository ppa:bitcoin/bitcoin
You will be prompted for your user password. Provide it to continue. Afterwards, the following text will be displayed:
Stable Channel of bitcoin-qt and bitcoind for Ubuntu, and their dependencies
More info: https://launchpad.net/~bitcoin/+archive/ubuntu/bitcoin
Press [ENTER] to continue or ctrl-c to cancel adding it
Press enter to continue. The following text (with some variations) will be displayed and you will be returned to the command line prompt:
gpg: keyring /tmp/tmpixuqu73x/secring.gpg' created gpg: keyring/tmp/tmpixuqu73x/pubring.gpg' created gpg: requesting key 8842CE5E from hkp server > > > >keyserver.ubuntu.com gpg: /tmp/tmpixuqu73x/trustdb.gpg: trustdb created gpg: key 8842CE5E: public key "Launchpad PPA for Bitcoin" imported gpg: no ultimately trusted keys found gpg: Total number processed: 1 pg: imported: 1 (RSA: 1) OK
Type the following line to get the most recent list of packages:
sudo apt-get update
A large number of lines will be displayed as different update files are downloaded. This step may take several minutes on a slow Internet connection.
To continue, choose one of the following options
sudo apt-get install bitcoin-qt
sudo apt-get install bitcoind
sudo apt-get install bitcoin-qt bitcoind
After choosing what packages to install, you will be asked whether you want to proceed. Press enter to continue.
If you’re logged in as an administrative user with sudo access, you may log out. The steps in this section should be performed as the user you want to run Bitcoin Core. (If you’re an expert administrator, you can make this a locked account used only by Bitcoin Core.)
Before using the Bitcoin Core daemon, bitcoind, you need to create its configuration file with a user name and password. First create the .bitcoin directory, create (touch) the file, and set the file’s permissions so that only your user account can read it. From the terminal, type:
mkdir ~/.bitcoin touch ~/.bitcoin/bitcoin.conf chmod 600 ~/.bitcoin/bitcoin.conf
Then you can run the command bitcoind. It will print output similar to this:
bitcoind Error: To use the "-server" option, you must set a rpcpassword in the configuration file: /home/bitcoinorg/.bitcoin/bitcoin.conf It is recommended you use the following random password: rpcuser=bitcoinrpc rpcpassword=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX (you do not need to remember this password)
The username and password MUST NOT be the same.
If the file does not exist, create it with owner-readable-only file permissions. It is also recommended to set alertnotify so you are notified of problems; for example: alertnotify=echo %s | mail -s "Bitcoin Alert" [email protected] The “rpcpassword” displayed will be unique for your system. You can copy the rpcuser and rpcpassword lines into your configuration file using the following commands. Note that in most Ubuntu terminals, you need to press Ctrl-Shift-C to copy and Ctrl-Shift-V to paste because Ctrl-C and Ctrl-V have different meanings in a Unix-style terminal.
echo rpcuser=bitcoinrpc >> ~/.bitcoin/bitcoin.conf echo rpcpassword=XXXXXX >> ~/.bitcoin/bitcoin.conf (Warning: Don’t use XXXXXX as your RPC password. Copy the rpcpassword displayed by bitcoind for your system.)
Now you can start Bitcoin Core daemon for real. Type the following command:
bitcoind -daemon
It will print a message that Bitcoin Core is starting. To interact with Bitcoin Core daemon, you will use the command bitcoin-cli (Bitcoin command line interface). Note: it may take up to several minutes for Bitcoin Core to start, during which it will display the following message whenever you use bitcoin-cli:
error: {"code":-28,"message":"Verifying blocks..."}
After it starts, you may find the following commands useful for basic interaction with your node:
to safely stop your node, run the following command:
bitcoin-cli stop
A complete list of commands is available in the Bitcoin.org developer reference.
When Bitcoin Core daemon first starts, it will begin to download the block chain. This step will take at least several hours, and it may take a day or more on a slow Internet connection or with a slow computer. During the download, Bitcoin Core will use a significant part of your connection bandwidth. You can stop Bitcoin Core at any time using the stop command; it will resume from the point where it stopped the next time you start it.
Optional: Start Your Node At Boot
Starting your node automatically each time your computer boots makes it easy for you to contribute to the network. The easiest way to do this is to start Bitcoin Core daemon from your crontab. To edit your crontab, run the following command:
crontab -e
@reboot bitcoind -daemon Save the file and exit; the updated crontab file will be installed for you. Now Bitcoin Core daemon will be automatically started each time your reboot your computer.
If you’re an Ubuntu expert and want to use an init script instead, see this Upstart script.
You have now completed installing Bitcoin Core. If you have any questions, please ask in one of Bitcoin’s many communities, such as Bitcoin StackExchange, BitcoinTalk technical support, or the #bitcoin IRC chatroom on Freenode.
To support the Bitcoin network, you also need to allow incoming connections. Please read the Network Configuration section for details.
Network Configuration
If you want to support the Bitcoin network, you must allow inbound connections.
When Bitcoin Core starts, it establishes 8 outbound connections to other full nodes so it can download the latest blocks and transactions. If you just want to use your full node as a wallet, you don’t need more than these 8 connections—but if you want to support lightweight clients and other full nodes on the network, you must allow inbound connections.
Servers connected directly to the Internet usually don’t require any special configuration. You can use the testing instructions below to confirm your server-based node accepts inbound connections.
Home connections are usually filtered by a router or modem. Bitcoin Core will request your router automatically configure itself to allow inbound connections to Bitcoin’s port, port 8333. Unfortunately many routers don’t allow automatic configuration, so you must manually configure your router. You may also need to configure your firewall to allow inbound connections to port 8333. Please see the following subsections for details.
Testing Connections
The BitNodes project provides an online tool to let you test whether your node accepts inbound connections. To use it, start Bitcoin Core (either the GUI or the daemon), wait 10 minutes, and then visit the GetAddr page (https://getaddr.bitnodes.io/). The tool will attempt to guess your IP address—if the address is wrong (or blank), you will need to enter your address manually.
For more instruction and reviews based off BTC please follow my subreddit /BTC_Reviews
all material from this post was found here --> https://bitcoin.org/en/full-node
submitted by Mattjhagen to BTC_Reviews [link] [comments]

How To Fix Low Disk Space Windows 7 - YouTube How to fix Low disk space on Hard drive - YouTube How To Set Up A Bitcoin Wallet How to Disable “Low Disk Space” Warning in Windows 10 / 8 ... How To Fix Low Disk Space In Windows 10/8/7 [Tutorial ...

Malware or buggy software gives Low Disk Space warning. Ask Question Asked 7 years, 11 months ago. ... I am getting an alert that in my c drive disk space is low. When I verified, free space in my c drive was decreasing hour by hour and there was a stage when it simply said that 0 mb free in C drive. Initially, I thought my system got infected by some sort of virus and scanned my whole system ... r/Bitcoin: A community dedicated to Bitcoin, the currency of the Internet. Bitcoin is a distributed, worldwide, decentralized digital money … Press J to jump to the feed. Press question mark to learn the rest of the keyboard shortcuts. r/Bitcoin. log in sign up. User account menu. 1. How much disk space is the blockchain going to take up? Close. 1. Posted by. u/Sophira. 6 years ago. Archived ... On Jan. 22, a team of students from the University of Illinois at Urbana Champaign (UIUC) released a unique study concerning the longevity of certain According to the research, more than 26 proof ... Low disk space on Windows 10 can show when the partition where the Windows OS has been installed does not have enough storage space. The full warning notification that you get when the Windows partition does not have much space left is “Your PC’s low on storage. Turn on storage sense and Windows can help free up space.”. It started importing blocks from the bootstrap.dat file and after that it started syncing but after a little it got stuck while I ran out space on my C: drive and I got message "Low on space!" so I closed the wallet, transfered the whole Bitcoin folder to another partition (with 100GB of free space) and ran the wallet again but it was not syncing and I got stuck at block #285337.

[index] [6549] [33867] [904] [10681] [6350] [1095] [31944] [12084] [16892] [12661]

How To Fix Low Disk Space Windows 7 - YouTube

Criteria for low disk space warning on XP? Helpful? Please support me on Patreon: https://www.patreon.com/roelvandepaar With thanks & praise to God, and with... "space recovery" "recover disk space" This video can help you fix the Low disk space on your HDD . Why low disk space without that much data ? Learn how to f... When any drive on your computer has less than 10% free disk space, a “Low Disk Space” warning will pop up at the bottom right side of the screen constantly. ... How To Fix Low Disk Space In Windows 10/8/7 [Tutorial] Need to free up some disk space on your PC? Windows 10 provides a dedicated screen where you can do ju... This video will give ifo about how to deal with the LOW DISK SPACE when trying to install Windows 10 consumer preview

#